Main Drive Shaft Drive shaft piece with integral, single-lead, work-hardened front worm, and integral, six-lead, work-hardened rear worm. Also includes pressed on GW-1714 and GW-930)
MTD-GW-20912
5
Washer, Flat, 1.50 x 1.75 x .010 NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04308
5
Washer, Flat, 1.50 x 1.75 x .03 NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04307
5
Washer, Flat, 1.50 x 1.75 x .005 NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04306
5
Shim Set (Incl. two 1224-2 and one GW-1224-3)
MTD-GW-1325C
6
BOLT- hex. hd., 5/16"-24 x 1-1/8", engine mounting
MTD-710-0672
7
Washer, Disc Spring (concave surface faces pulley)
MTD-736-04193